Swift GT/GTi oil pump

[blackssgt]

Hello Swift community. I have been looking for an oil pump for my 94 GT. I know ITM made them but I can't seem to find any available. Some sites say they fit but they are either for a g10 or g13 for a samurai. Any suggestions where I could find one? They are different part numbers and I am assuming the GT/GTi sends more volume of oil to the head as it is DOHC. Thanks!

 

[macuserman]

Hmmm that's kinda concerning, I'm not seeing any available either.

 

[Walt]

I have not been able to buy a new G13B oil pump for more then 2 years.
Not on Mega zipp as local car suplyers.
When i ordered a G16B oil pump with the correct SGP numbers.
It was just the same as a G13BA oil pump.
Anyway it works on my G13B engine with the hydraulic lashers.
I use this engine a lot just for driving not racing.
Hope this helps.

 

[macuserman]

I have not been able to buy a new G13B oil pump for more then 2 years.
Not on Mega zipp as local car suplyers.
When i ordered a G16B oil pump with the correct SGP numbers.
It was just the same as a G13BA oil pump.
Anyway it works on my G13B engine with the hydraulic lashers.
I use this engine a lot just for driving not racing.
Hope this helps.

That's good to know! Appreciate you chiming in with that feedback. Lots of unconfirmed info about the differences in oil pumps on the internet.

 

[blackssgt]

I have not been able to buy a new G13B oil pump for more then 2 years.
Not on Mega zipp as local car suplyers.
When i ordered a G16B oil pump with the correct SGP numbers.
It was just the same as a G13BA oil pump.
Anyway it works on my G13B engine with the hydraulic lashers.
I use this engine a lot just for driving not racing.
Hope this helps.

Thank you for the info Walt! So you have used a G16b oil pump on your G 13B DOHC 16v swift engine? Also is it the g16 16 valve pump part number (16100-61825)? Just confirming so I can purchase one.

 

[Walt]

Thank you for the info Walt! So you have used a G16b oil pump on your G 13B DOHC 16v swift engine? Also is it the g16 16 valve pump part number (16100-61825)? Just confirming so I can purchase one.

The G16B oil pump I got has part number 16100-60840.
Yes back in the red line days. The boys down under wrote that the G16B got more flow. So I once ordered one.
Picture 1 and 2.

Interesting is that part number 16100-61825 is for the G13BB engine. That must have the hole for the crankshaft sensor. I do not know if the stock oilpan will fit.

Picture 3 and 4 are from a G13BB engine.

Hope this helps.

 

[Walt]

Some oilpan pictures.
So you can see the differences.

 

[blackssgt]

Some oilpan pictures.
So you can see the differences.

Thanks Walt! You're awesome!

 

[blackssgt]

Thank you Walt! You saved me on this one!