• User avatar
User avatar
By OnePeddleMissin
Avatar
#10142
I bought this quaint old wet OPG on Ebay @£3
It doesn’t have illumination and the white paint was flaking off the pointer…. Now bright yellow!

Image

I am reconfiguring the gauge mech into a 50mm housing (actually a FlowPlast gutter joint @£1.50) with a new crystal lens & LED backlighting

Image

You see (through..) here the pod, mocked up on my screen pillar, for the Line of Sight.
Much has been printed about copper vs nylon feed piping…. I had a length of nylon HP on barbed ends replace one of my diesel injector steel pipes for a year = I’m going nylon from a performance retailer.

So I can keep Oil light + Gauge I’m fitting a brass ‘T’ >>> remote on a high pressure flexipipe to avoid ‘vibration fatigue failure’ :innocent:

I will post photos when it is all installed.

OPM
macuserman, Walt liked this

SKU:AP-HSK-SUZUKI G13 is the ARP head studkit. ord[…]

new job

there is a sign on the wall, as well as printed on[…]

Turbo Exhaust Manifold

One of my goals was to not increase the injector s[…]

My 1992 rebuild album

Wait...are you seeing it? Because it’s not s[…]