• User avatar
User avatar
By OnePeddleMissin
Posts Avatar
#10142
I bought this quaint old wet OPG on Ebay @£3
It doesn’t have illumination and the white paint was flaking off the pointer…. Now bright yellow!

Image

I am reconfiguring the gauge mech into a 50mm housing (actually a FlowPlast gutter joint @£1.50) with a new crystal lens & LED backlighting

Image

You see (through..) here the pod, mocked up on my screen pillar, for the Line of Sight.
Much has been printed about copper vs nylon feed piping…. I had a length of nylon HP on barbed ends replace one of my diesel injector steel pipes for a year = I’m going nylon from a performance retailer.

So I can keep Oil light + Gauge I’m fitting a brass ‘T’ >>> remote on a high pressure flexipipe to avoid ‘vibration fatigue failure’ :innocent:

I will post photos when it is all installed.

OPM
macuserman, Walt liked this
'87 pontiac firefly

caliper is back on, tire rotates alot easier now […]

93 Swift Chevy Turbo

I got the ARP longer studs on the rear, and I have[…]

UPGRADING MY ''MAN'' CAVE

https://i.imgur.com/e3lYQ7t.jpg toasty in the sh[…]

Sourced some switches :-) https://i.imgur.com/V[…]